What is movable shot blasting machine

WHAT IS SHOT BLASTING?

BESTECH closed circuit shot blasting machines throw a large amount of steel shot at very high speed by centrifugal force at the surface. After the steel abrasive hits the surface, the shot blaster recycles the media. Dust and contaminants are removed by an air wash separator and are removed to a dedicated BESTECH dust collector. This makes the shot blasting process almost dust-free in operation. Blasting floors with steel shot is the most environmentally friendly abrasive blasting method there is, because there is no use of chemical products and no waste of valuable drinking water.




WHERE CAN SHOT BLASTING BE USED FOR?


Airport runway automatic shot blasting floor equipment by BESTECH can achieve a fine cleaning effect by throwing abrasive media by centrifugal force towards road, floor, highway, airport runway and steel plates. To clean and prepare surfaces | such as steel, concrete and asphalt.
To remove top layers | like paint and epoxy.
To remove markings & rubber | from highways, runways, industrial floors and more.
To improve skid resistance | on surfaces such as sidewalks, bike paths, roads and runways.an air wash separator will separate the dust and contaminants with abrasive media, then exhaust clean air by dust collector, which makes the whole operation almost dust-free.




Floor shot blaster is driven by the motor to produce centrifugal force and wind force in high-speed rotation. Operators need to input a certain particle size of shot material that the flow can be controlled. As soon as the shot material is fed into the pellet tube, it will be accelerated into the pellet wheel at high speed. Under the action of the centrifugal force, the shot material is thrown into the directional sleeve by the window of the dividing wheel, then it will be thrown through the directional window which can control the throwing direction of the projectile material. The high-speed rotating blade will pick them up and accelerates along the length direction of the blade until they are thrown out. The thrown projectiles can form a certain fan-shaped stream beam which can impact the working surface and play the role of clearing and strengthening.