The correct operation process of the sand mixer

The sand mixer is a device that evenly mixes the components in the molding sand and effectively coats the binder on the surface of the sand grains. Correct operating procedures can reduce the occurrence of security incidents. The following will introduce the correct operation process of the sand mixer.
1. Before entering the workshop, you must wear protective equipment such as safety shoes, helmets, masks, gloves, etc., otherwise you are not allowed to enter the workshop. 2. The operator of the sand mixer must be familiar with the structure and performance of the equipment used.
3. The new sand of the sand mixer needs to be screened and dried; the old sand needs to be regenerated before it can be used.
4. When adding resin and curing agent, you must wear gloves and glasses, and operate carefully to avoid splashing on your body. The ratio is required to be accurate.
5. Before starting the mixer, check whether there are obstacles on both sides of the guide rail. During the driving process, pay attention to the passing pedestrians.
6. When working, there should be a special person in charge, and no other personnel shall be allowed to operate it to avoid illegal operation.
7. When overhauling the sand mixer, in addition to cutting off the power supply, a special person should be set up to monitor it.
8. When cleaning the sand mixing tank, stop the machine and clean the spiral blades to prepare for the next sand mixing.
9. Remove the sand and objects scattered on the workplace in time, and keep the workplace and pedestrian passages clean and unobstructed for safety.