-High productivity
-Good cleaning efficiency
Turntable shot blasting machine is suitable for cleaning flat, thin wall casting and heat treatment workshop, afraid of adhering sand on the surface of the oxide skin collision parts such as attachments.By blast cleaning, can not only remove the rust on the surface of the work piece, remove the rust on the various artifacts, dirt, etc., and improve the surface quality of work piece;At the same time, can improve the fatigue fracture resistance of processed work piece, to prevent the fatigue failure, plastic deformation and brittle fracture, improve the fatigue life of dealing with the work piece.
Advantages of Turntable Shot Blasting Machine
Q35 Series Turntable Shot Blasting Machine is suitable for surface treatment of small-batch castings, forgings and heat treatment parts. It also can strengthen the surface of work-pieces according to the requirements of customers.
The turntable is installed on the revolving door with bearing. With the opening of the door, the turntable will turn out. It is very convenient to take and place the work-piece.
The turntable is divided into indoor and outdoor parts by the rubber sealing curtain of the cleaning room. Indoor cleaning, outdoor revolving and the work-piece loading and unloading, with high productivity.
Especially suitable for the surface cleaning of the work-piece which has the feature of the flat; thin wall and fear collision.
The work-piece is placed on the low-speed rotating workbench, and the Impeller Head is arranged on the upper and side of the cleaning room to shoot the work-piece.
It is required that the height of the cleaned parts shall not exceed 300 mm. (this height refers to the local height of the parts, not the height of all parts on the whole turntable).
The weight of a single piece shall not exceed 50 kg for small parts.
Generally applicable to the work-pieces with cleaning requirements only for one side (flat parts).
|
Model |
Q3512 |
Q3525 |
|
Dimension of workpiece(mm) |
600*250*250 |
1000*500*250 |
|
Max weight of workpiece(kg) |
400 |
1000 |
|
Blast volume(kg/min) |
200 |
2*250 |
|
Lifting capacity(t/h) |
15 |
30 |
86-532-86168115
+86-18561456376
Tel: 86-532-86168115
